Use when extra positioning is needed. 30 minute delayed setting time allows you that extra time to position your piece accurately.
Araldite Rapid 5min High Performance Epoxy Adhesive.
The super strong, gap-filling epoxy can be used for:
Waterproof, chemical & heat resistant
Bonds most of materials to themselves or to one another especially :
– Rigid plastic
Cures fast at room temperature (18 – 24 °C). Enable rapid but durable assembly and repair work. Cure slowly at temperature dawn 5 °C
Instructions to use:
– Make sure surfaces to be joined are clean and free from dust, corrosion, dirt and grease.
– For optimum bonding, roughen smooth , glossy surfaces.
– Squeeze out equal amounts of Resin and Hardener
– Mix thoroughly and use within 5 minutes (if at 18-24 °C room temperature).
– Apply mix in both surfaces
– Assemble parts and hold together with clamps, tape, string or weight, etc. for at least 10-15 minutes.
– The newly bonded joint can be handled after 3 hours and attains its full strength after 8 hours.
– To avoid contamination always replace same color cap on same colors tube.
– Avoid skin and eye contacts. Wash hands with warm water and soap.
Packaging: (2 x 17ml)